INGCACISO YEMVELISO:
AWS: A5.14
Iyahambelana neSiqinisekiso: AWS A5.14 ASME SFA A5.14
Inkqubo yeWeld: GMAW & ASAW Iinkqubo zeWelding
I-ERNiCrMo-10 isetyenziselwa ukuwelda isiseko se-nickel-chromium-molybdenum kubo, intsimbi kunye nezinye iziseko ze-nickel alloys, kunye neentsimbi zokugquma.Ingasetyenziselwa ukuwelda i-duplex, iintsimbi ze-super duplex ezingenasici.
IiMfuno ze-AWS zokuBunjwa kweMichiza
| C = 0,015 max | Cu = 0,50 max |
| Mn = 1.0 max | Ni = Ntsalela |
| Fe = 3.0 max | Co = 2.0 max |
| P = 0,04 max | Cr = 14.0 - 18.0 |
| S = 0,03 max | Mo = 14.0 - 18.0 |
| Si = 0.08 max | W = 0.50 max |
| Okunye = 0.50 max | Ti = 0,70 max |
NCEDA UFOWELE UKUBA UFUNA ULWAZI OLUNYE NOBUKHULU OBUFUMANEKAYO:
Isicelo
I-ERNiCrMo-7 isetyenziselwa ukuwelda isiseko se-nickel-chromium-molybdenum kuyo ngokwayo, intsimbi kunye nezinye isiseko se-nickel alloys kunye nokugquma intsimbi nge-NI-CR-MO weld material.
IIPARAMETHA ZEMVELISO:
| Ubume beKhemikhali eDipozithiweyo % (Eqhelekileyo) | ||
| C = 0,01 | Cr = 16,5 | Ni = Ibhalansi |
| Fe = 2.20 | Mo = 15,75 | |
| Zonke iiPropati zeWeld Metal ezibekiweyo % (AW) | ||
| Tensile strength | 113,00 psi | |
| Elongation | 29% | |
IIPROPATI ZEMPHUMELELO EZIGCINWEYO CHARPY-V-NOTCH:
Ayingeni
| IiParameters ze-Welding ezicetyiswayo ze-MIG kunye ne-SAW Welding ye-Nickel Alloys | ||||
| Inkqubo | Idayamitha yocingo | Umbane (V) | I-Amperage (A) | Irhasi |
| MIG | .035 intshi | 26 - 29 | 150 - 190 | 75 % Argon + 25% Helium |
| .045 intshi | 28 - 32 | 180 - 220 | 75 % Argon + 25% Helium | |
| 1/16 intshi | 29 - 33 | 200 - 250 | 75 % Argon + 25% Helium | |
| WABONA | 3/32 intshi | 28 - 30 | 270 - 350 | I-Flux efanelekileyo ingasetyenziswa. |
| 1/8 intshi | 29 - 32 | 350 - 450 | I-Flux efanelekileyo ingasetyenziswa. | |
| 5/32 intshi | 30 - 33 | 400 - 550 | I-Flux efanelekileyo ingasetyenziswa. | |
