Cast Iron WeldingI-Electrode
Z508
GB/T EZNiCu-1
Inkcazo: I-Z508 i-electrode ye-iron welding welding ene-nickel-copper alloy (i-Monel) engundoqo kunye ne-graphitized coating.I-AC kunye ne-DC ezimbini-injongo, i-arc ezinzileyo, kulula ukuyisebenzisa.Ukwenziwa kwayo kunye nokusebenza kokusika kusondele kwi-Z308, kodwa ngenxa yokuncipha okukhulu kwentsimbi egciniweyo, ukuxhathisa ukuqhekeka kubi.Amandla adibeneyo adibeneyo aphantsi, ngoko ayifanelekanga ukudibanisa iindawo ezigxininisiweyo.
Isicelo: Isetyenziselwa ukulungiswa kwe-welding ye-grey iron castings engadingi amandla aphezulu.
Ukwakhiwa kweekhemikhali zentsimbi edibeneyo(%):
| C | Si | Mn | Fe | S | Ni | Cu | Abanye |
| 0.35 ~ 0.55 | ≤0.75 | ≤2.3 | 3.0 ~ 6.0 | ≤0.025 | 60 ~ 70 | 25 ~ 35 | ≤1.0 |
yangoku eCetyisiweyo:
| Intonga yobubanzi (mm) | 3.2 | 4.0 | 5.0 |
| Welding okwangoku (A) | 90 ~ 110 | 120 ~ 150 | 160 ~ 190 |
Isaziso:
1. I-electrode kufuneka ibhakwe ngeyure eli-1 malunga ne-150 ℃ ngaphambi kokusebenza kwe-welding;
2. Xa u-welding, kuyacetyiswa ukuba usebenzise indlela encinci, kwaye ubude be-weld nganye akufanele budlule i-50mm.Ngokukhawuleza udibanise i-weld ngesando esincinci ukukhulula uxinzelelo kwindawo yokulungisa i-weld kunye nokukhusela iintanda emva kwe-welding.
I-Wenzhou Tianyu Electronic Co., Ltd. yasekwa ngo-2000. Siye sazixakekisa ekwenzeni ii-electrode zokuwelda, ii-welding rods, kunyei-welding iyasebenzisekaiminyaka engaphezu kwama-20.
Iimveliso zethu eziphambili ziquka i-electrode yentsimbi ye-welding, i-carbon steel welding electrode, i-alloy welding electrode, i-electrode ye-welding, i-nickel & ne-cobalt alloy welding electrode, intsimbi ethambileyo kunye ne-low alloy welding wires, i-welding steel wire, i-gas-shielded flux cored wire, iingcingo ze-aluminiyam, ukuwelda kwe-arc emanzini.iingcingo, i-nickel & ne-cobalt alloy welding ingcingo, iingcingo zokuwelda zobhedu, i-TIG & ne-MIG iingcingo zokuwelda, ii-electrode ze-tungsten, i-carbon gouging electrode, kunye nezinye izincedisi ze-welding & consumables.
