I-ER5356 yi-alloy ye-aluminium yohlobo oluqhelekileyo edla ngokukhethwa ngenxa yamandla ayo aphezulu okucheba. Ukongeza, ikwabonelela ngokumelana nokugqwala okuhle kakhulu xa ivezwa emanzini anetyuwa. I-ER5356 kufuneka iqwalaselwe xa kudityaniswa iintsimbi ze-aluminium ezisisiseko ze-5000 series.
Izicelo eziqhelekileyo: ucingo lokugcwalisa i-welding
| Iklasi ye-AWS: ER5356 | Isiqinisekiso: AWS A5.10/ A5.10M:1999 |
| I-alloy: ER5356 | I-AWS/ASME SFA A5.10 |
| Indawo yokuWelda: F, V, OH, H | Okwangoku: I-DCEP-GMAW I-AC-GTAW |
| Ukuqhuba: | 29% IACS (-0)/27% IACS (-H18) |
| Amandla okuThamba, kpsi: | 38 |
| Umbala: | Mhlophe |
| Indawo yokunyibilika | 1175⁰F | Ukuqina | 1060⁰F | Uxinano | 0.096 lbs/cu Ngaphakathi. |
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Okunye | AL |
| 0.25 | 0.40 | 0.10 | 0.50-1.0 | 4.7-5.5 | 0.05-0.20 | 0.25 | 0.05-0.20 | 0.15 | Intsalela |
| Iiparameters zeWelding eziqhelekileyo | |||||
| Ububanzi | Inkqubo | I-Volt | Ii-Amps | Igesi | |
| in | (mm) | ||||
| .030 | (.8) | I-GMAW | 15-24 | 60-175 | I-Argon (cfh) |
| .035 | (.9) | I-GMAW | 15-27 | 70-185 | I-Argon (cfh) |
| 3/64” | (1.2) | I-GMAW | 20-29 | 125-260 | I-Argon (cfh) |
| 1/16” | (1.6) | I-GMAW | 24-30 | 170-300 | I-Argon (cfh) |
| 3/32” | (2.4) | I-GMAW | 26-31 | 275-400 | I-Argon (cfh) |
| Ububanzi | Inkqubo | I-Volt | Ii-Amps | Igesi | |
| in | (mm) | ||||
| 1/16” | (1.6) | I-GTAW | 15 | 60-80 | I-Argon (cfh) |
| 3/32” | (2.4) | I-GTAW | 15 | 125-160 | I-Argon (cfh) |
| 1/8” | (3.2) | I-GTAW | 15 | 190-220 | I-Argon (cfh) |
| 5/32” | (4.0) | I-GTAW | 15 | 200-300 | I-Argon (cfh) |
| 3/16” | (4.8) | I-GTAW | 15-20 | 330-380 | I-Argon (cfh) |
I-Wenzhou Tianyu Electronic Co., Ltd. yasekwa ngo-2000. Besisenza ushishino lokuvelisa ii-electrode zokuwelda, iintonga zokuwelda, kunye nezinto ezisetyenziswayo zokuwelda kangangeminyaka engaphezu kwama-20.
Iimveliso zethu eziphambili ziquka ii-electrode zokuwelda zentsimbi engagqwaliyo, ii-electrode zokuwelda zentsimbi yekhabhoni, ii-electrode zokuwelda ze-alloy ephantsi, ii-electrode zokuwelda eziphezu komhlaba, ii-electrode zokuwelda ze-nickel kunye ne-cobalt alloy, ii-wire welding zentsimbi emild kunye ne-low alloy, ii-wire welding zentsimbi engagqwaliyo, ii-wire ze-flux cored ezikhuselwe yigesi, ii-wire welding ze-aluminium, ii-inferiored arc welding. ii-wire, ii-wire welding ze-nickel kunye ne-cobalt alloy, ii-wire welding ze-brass welding, ii-wire welding ze-TIG kunye ne-MIG, ii-electrode ze-tungsten, ii-electrode ze-carbon gouging, kunye nezinye izixhobo zokuwelda kunye nezinto ezisetyenziswayo.