Umfanekiso obonisiweyo we-AWS E6012 Welding Rods

Iintambo zokuWelda ze-AWS E6012

Inkcazo emfutshane:

I-E6012 yi-electrode esetyenziswa ngokubanzi enika iimpawu ezintle zokudibanisa, ingakumbi kwizicelo ezingenazo izixhobo ezifanelekileyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

I-E6012 yi-electrode esetyenziswa ngokubanzi enika iimpawu ezintle zokudibanisa, ingakumbi kwizicelo ezingenazo izixhobo ezifanelekileyo.

I-E6012 ine-arc elungileyo nezinzileyo kwaye isebenza kwimijelo ephezulu ene-spatter ephantsi. Isebenziseka lula kakhulu, i-E6012 ingasetyenziswa ngamandla e-AC kunye ne-DC.

Izicelo eziqhelekileyo: izixhobo zasefama, ukulungiswa ngokubanzi, ukwenziwa koomatshini, ifenitshala yesinyithi, isinyithi sokuhombisa, isinyithi seshiti, iitanki

Iinkcukacha ze-AWS: AWS A5.1 E6012

Inkcazo yeJIS: D4312

Ezinye iinkcukacha: DIN E4321 R3

I. ISICELO:

Izinto ezenziwe ngentsimbi ethambileyo, iifestile zentsimbi kunye neegrill zentsimbi kunye neengcingo, intsimbi yesikhongozeli, ukuwelda kwemibhobho engagalelwanga nge-galvanized, izakhiwo zentsimbi zezindlu, izitulo zentsimbi kunye neetafile, iileli zentsimbi kunye nezinye iintsimbi ezithambileyo ze-light gauge kunye nezinye.

II. INKCAZELO:

I-electrode yokuWelda ye-Shielded Metal Arc Welding eyenzelwe yonke indawo eneempawu ezilungileyo zokudibanisa kunye nokungena. Ifanelekile ukuvala izikhewu kwimisebenzi engalinganiyo kakuhle. Iphatha ngokulula kwisinyithi esikhanyayo kunye nakwizakhiwo zentsimbi enzima. I-Weld ineentsimbi ezigudileyo, ezijikelezileyo kwaye ezilinganayo ezinomphezulu oqhekekileyo. Iifillets zijijekile ngaphandle kokunqunyulwa. Ukusebenza kwayo kuzo zonke iindawo, kunye nesinyithi sokuwelda esibandayo esikhawulezayo kunye ne-arc enamandla kuyenza ibe yi-electrode efanelekileyo kwiimeko zeworkshop kunye nendawo. Iimpawu ezibalaseleyo zokubeka xa uWelda phezulu nasezantsi. I-slag iphuma ngokulula kakhulu kwaye kwiimeko ezininzi iyazikhulula ngokwayo.

III. AMANQAKU NGOKUSETYENZISWA:

Nika ingqalelo ukuba ungadluli kuluhlu lwemijelo efanelekileyo. Ukuwelda ngomsinga ogqithisileyo akugcini nje ngokunciphisa isandi se-X-ray, kodwa kukwabangela ukwanda kokuchitheka, ukunqunyulwa okungaphelelanga kunye nokungagqumi ngokwaneleyo kwe-slag.

Yomisa ii-electrode kwi-70-100 degrees C imizuzu engama-30-60 ngaphambi kokuba uyisebenzise. Ukufunxwa komswakama okugqithisileyo kunciphisa ukusetyenziswa kwaye kunokubangela ukuba kubekho imingxunya ethile.

Ukomisa kakhulu ngaphambi kokusetyenziswa kubangela ukungena okuncinci kunye nokushisa kakhulu kwe-electrode

Iklasi ye-AWS: E6012	Isiqinisekiso: AWS A5.1/A5.1M:2004
I-alloy: E6012	I-ASME SFA A5.1

Indawo yokuWelda: F, V, OH, H

Okwangoku:

I-AC-DCEN

Amandla okuThamba, kpsi:	imizuzu engama-60
Amandla okuvelisa, kpsi:	imizuzu engama-48
Ukwandiswa kwi-2” (%):	imizuzu eli-17

I-Cystemi yeWire eqhelekileyo ngokwe-AWS A5.1 (amaxabiso alinganayo aphezulu)

C	Mn	Si	P	S	Ni	Cr	Mo	V	Umda oDityanisiweyo we-Mn+Ni+Cr+Mo+V
0.20	1.20	1.00	*NS	*NS	0.30	0.20	0.30	0.08	*NS

*Ayichazwanga ngqo

Iiparameters zeWelding eziqhelekileyo
Ububanzi		Inkqubo	I-Volt	Ii-Amps (ezithe tyaba)
in	(mm)	Inkqubo	I-Volt	Ii-Amps (ezithe tyaba)
3/32	(2.4)	I-SMAW	19-25	35-100
1/8	(3.2)	I-SMAW	20-24	90-160
5/32	(4.0)	I-SMAW	19-23	130-210
3/16	(4.8)	I-SMAW	18-21	140-250