Email: info@tyuelec.com Tel: +86-577-62511131
English
AWS E6010 iMild Steel Welding Electrode, Carbon Steel Welding Rods, High Cellulose Welding Stick Featured Image
  • I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.
  • I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.
  • I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.
  • I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.
  • I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.

I-AWS E6010 i-Electrode yokuWelding yentsimbi eMild, i-Carbon Steel welding Rods, i-High Cellulose Stick.

Inkcazelo emfutshane:

I-J425G (AWS E6010) yi-cellulose ephezulu ye-sodium-coated vertical downward electrode.


Iinkcukacha zeMveliso

Iithegi zeMveliso

I-Carbon Steel Welding Electrode 

I-J425G                                                       

GB/T E4310

AWS A5.1 E6010

Inkcazo: I-J425G yi-cellulose ephezulu ye-sodium-coated vertical downward electrode.Sebenzisa i-DCEP (i-electrode yangoku echanekileyo), elungele yonke indawo ethe nkqo ezantsi ukuwelda komthungo wesetyhula kwisiza sombhobho.Xa udibanisa umaleko ongezantsi, unokudityaniswa kwelinye icala kwaye wenze kumacala omabini, kwaye isantya se-welding sikhawuleza.

Isicelo: Isetyenziselwa ukuwelda komthungo ojikelezayo wemibhobho yentsimbi yekhabhoni eyahlukeneyo.

 

Ukwakhiwa kweekhemikhali zentsimbi edibeneyo(%):

C

Mn

Si

S

P

≤0.20

0.30~0,60

≤0.20

≤0.035

≤0.040

 

Iimpawu zobuchwephesha bentsimbi ye-weld:

Into yovavanyo

Tensile strength

Mpa

Unikeze Amandla

Mpa

Elongation

%

Ixabiso lempembelelo (J)

(-30℃)

Iqinisekisiwe

≥420

≥330

22

≥27

 

Ukuhlolwa kwe-X-ray: ibakala le-II

 

yangoku eCetyisiweyo:

Intonga yobubanzi

(mm)

2.5

3.2

4.0

5.0

Welding okwangoku

(A)

40 ~ 70

70 ~ 110

110 ~ 160

160 ~ 190

 

Isaziso:

1. Khupha intonga ye-welding ngaphambi kokusetyenziswa, kwaye uyisebenzise kangangoko emva kokukhupha;

2. Ngokuqhelekileyo, akukho mfuneko yokumisa kwakhona ngaphambi kwe-welding, kwaye inokomiswa kwi-70 ~ 90 ° C ngeyure eli-1 xa imanzi.

 

I-Wenzhou Tianyu Electronic Co., Ltd. yasekwa ngo-2000. Siye sazixakekisa ekwenzeni ii-electrode zokuwelda, iintonga ze-welding, kunye nezinto ezisetyenziselwa ukuwelda iminyaka engaphezu kwama-20.

Iimveliso zethu eziphambili ziquka i-electrode yentsimbi ye-welding, i-carbon steel welding electrode, i-alloy welding electrode, i-electrode ye-welding, i-nickel & ne-cobalt alloy welding electrode, intsimbi ethambileyo kunye ne-low alloy welding wires, i-welding steel wire, i-gas-shielded flux cored wire, iingcingo ze-aluminiyam, ukuwelda kwe-arc emanzini.iingcingo, i-nickel & ne-cobalt alloy welding ingcingo, iingcingo zokuwelda zobhedu, i-TIG & ne-MIG iingcingo zokuwelda, ii-electrode ze-tungsten, i-carbon gouging electrode, kunye nezinye izincedisi ze-welding & consumables.

 

  • Ngaphambili:
  • Okulandelayo:

    • Iimveliso ezinxulumeneyo