I-Alloy ephantsi ye-Steel Welding Electrode
J606
I-GB/T E6016-D1
AWS E9016-D1
Inkcazo: I-J606 i-alloy-alloy high-power steel electrode ene-low-hydrogen potassium coating.Ingasetyenziselwa ukuwelda indawo yonke kunye ne-AC kunye ne-DC.Uzinzo lwentsebenzo ye-welding ye-AC ingaphantsi kwe-DC welding.
Isicelo: Isetyenziselwa i-welding medium carbon steel kunye ne-alloy low-alloy high-strength steel structures of the strength ehambelanayo, njenge-Q420, njl.
Ukwakhiwa kweekhemikhali zentsimbi edibeneyo(%):
| C | Mn | Si | Mo | S | P |
| ≤0.12 | 1.25 ~ 1.75 | ≤0.60 | 0.25 ~ 0.45 | ≤0.035 | ≤0.035 |
Iimpawu zobuchwephesha bentsimbi ye-weld:
| Into yovavanyo | Tensile strength Mpa | Unikeze Amandla Mpa | Elongation % | Ixabiso lempembelelo (J) -30℃ |
| Iqinisekisiwe | ≥590 | ≥490 | ≥15 | ≥27 |
| Ivavanyiwe | 620 ~ 680 | ≥500 | 20 ~ 28 | ≥27 |
Ukusasazwa kwe-hydrogen umxholo wesinyithi ogciniweyo: ≤4.0mL/100g (indlela yeglycerin)
Ukuhlolwa kwe-X-reyi: Ibanga
yangoku eCetyisiweyo:
| (mm) Intonga yobubanzi | 2.0 | 2.5 | 3.2 | 4.0 | 5.0 | 5.8 |
| (A) I-Welding yangoku | 40 ~ 70 | 70 ~ 90 | 90 ~ 120 | 140 ~ 180 | 180 ~ 220 | 210 ~ 260 |
Isaziso:
1. I-electrode kufuneka ibhakwe ngeyure eli-1 kwi-350 ℃ ngaphambi kokusebenza kwe-welding;
2. Kubalulekile ukucoca umhlwa, isikali se-oyile, amanzi, kunye nokungcola kwiindawo zokuwelda phambi kokuba udibanise;
3. Sebenzisa umsebenzi omfutshane we-arc xa udibanisa.Umzila we-welding emxinwa ufanelekile;
4. Xa i-weld part ijiyile, kufuneka ifudunyezwe ukuya kuthi ga kwi-150 ° C kwaye ipholile kancinane emva kwe-welding.
Iimveliso ezinxulumeneyo
-
Intsimbi ephantsi yeWelding Electrode AWS E9015-D1 ...
-
I-J607 (AWS E9015-D1) i-Low Alloy Steel Welding Ele...
-
I-AWS E9015-G I-Low Alloy Steel Welding Rod I-hyd ephantsi...
-
I-AWS E10015-D2 I-Low Alloy Welding Rod Low-Hydroge...
-
I-Low Alloy Steel Welding Electrode ephantsi AWS E7018-G
-
I-AWS E8015-G I-Electrode Ephantsi Ye-Hydrogen Ephantsi I-Alloy S...
