I-Carbon Steel Welding Electrode
J506Fe13
GB/T E5028
I-AWS A5.1 E7028
Inkcazo: I-J501Fe13 yi-carbon steel electrode kunye ne-iron powder kunye ne-low hydrogen potassium coating.I-AC kunye ne-DC zimbini-injongo, zilungele i-flat welding kunye ne-flat fillet welding.Ukusebenza kakuhle kokubekwa kumalunga ne-130%.
Isicelo: Isetyenziselwa i-welding flat kunye ne-flat angle welding ye-carbon steel kunye nentsimbi ephantsi ye-alloy, njenge-Q345, njl.
Ukwakhiwa kweekhemikhali zentsimbi edibeneyo(%):
| C | Mn | Si | S | P |
| ≤0.12 | ≤1.60 | ≤0.75 | ≤0.035 | ≤0.035 |
Iimpawu zobuchwephesha bentsimbi ye-weld:
| Into yovavanyo | Tensile strength Mpa | Unikeze Amandla Mpa | Elongation % | Ixabiso lempembelelo (J) (-46℃） |
| Iqinisekisiwe | ≥490 | ≥400 | ≥22 | ≥27 |
Ukusasazwa kwe-hydrogen umxholo wesinyithi egciniweyo: ≤8.0mL/100g (indlela yeglycerin)
Ukuhlolwa kwe-X-ray: ibakala le-II
yangoku eCetyisiweyo:
| Intonga yobubanzi (mm） | 4.0 | 5.0 |
| Welding okwangoku (A） | 180 ~ 220 | 210 ~ 260 |
Isaziso:
I-1.I-electrode kufuneka ibhakwe ngeyure eli-1 kwi-350 ℃ ngaphambi kokusebenza kwe-welding;
2. Kubalulekile ukucoca umhlwa, isikali se-oyile, amanzi, kunye nokungcola kwiindawo zokuwelda phambi kokuba udibanise.
I-Wenzhou Tianyu Electronic Co., Ltd. yasekwa ngo-2000. Siye sazixakekisa ekwenzeni ii-electrode zokuwelda, iintonga ze-welding, kunye nezinto ezisetyenziselwa ukuwelda iminyaka engaphezu kwama-20.
Iimveliso zethu eziphambili ziquka i-electrode yentsimbi ye-welding, i-carbon steel welding electrode, i-alloy welding electrode, i-electrode ye-welding, i-nickel & ne-cobalt alloy welding electrode, intsimbi ethambileyo kunye ne-low alloy welding wires, i-welding steel wire, i-gas-shielded flux cored wire, iingcingo ze-aluminiyam, ukuwelda kwe-arc emanzini.iingcingo, i-nickel & ne-cobalt alloy welding ingcingo, iingcingo zokuwelda zobhedu, i-TIG & ne-MIG iingcingo zokuwelda, ii-electrode ze-tungsten, i-carbon gouging electrode, kunye nezinye izincedisi ze-welding & consumables.
